AS/NZS 5601.2:2010

Gas installations - Part 2: LP Gas installations in caravans and boats for non-propulsive purposes

This document has been re-assessed by the committee, and judged to still be up to date.

WARNING:  This document has been replaced by 

Warning: This document has been replaced by AS/NZS 5601.2:2013. However, the Gas (Safety and Measurement) Amendment Regulations 2014, which come into force on 31 July 2014, introduce a transitional provision that allows the use of AS/NZS 5601.2:2010 until 31 December 2015.

Contains the mandatory requirements and means of compliance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.

Table of contents are automatically generated, and may not be 100% accurate.

 
 

Buy product

Download PDF.
$177.30 NZD (ex GST)Retail
$141.84 NZD (ex GST)Members
Order hardcopy.
$197.00 NZD (ex GST)Retail
$157.60 NZD (ex GST)Members
Subscribe online to this Standard for one year.

Add to cart for pricing

 
Preview sample of document.

Preview sample of document

Amendment history

Supersedes

Publishing information

Status: CURRENT

Published: 23/12/2010

Pages: 72

Committee:  AG/06

This document is cited by New Zealand legislation. Expand the box to see details.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  44(3)

Citation Context:
Until 31/12/2015: (3) Every person who supplies or intends to supply an imported gas installation to a retailer or consumer must, before supplying the gas installation, ensure that it complies with the requirements of section 2 of whichever of the following applies: (a) AS/NZS 5601.1; or (b) AS/NZS 5601.2.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  45(1)

Citation Context:
Until 31/12/2015: (1) All gasfitting work done on a gas installation or part installation must be tested... ...(d) in the case of a gas installation or part installation that does not comply with sections 3 to 6 of AS/NZS 5601.1 or sections 3 to 9 of AS/NZS 5601.2 (as applicable), in accordance with the verification or testing process set out in the certified design for the gas installation or part installation.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  44(1)

Citation Context:
Until 31/12/2015: (1) Every person who designs, installs, tests, commissions, or connects a gas installation or part installation must design, install, test, commission, and connect the gas installation or part installation in accordance with any applicable certified design and whichever of the following applies: (a) AS/NZS 5601.1; or (b) AS/NZS 5601.2.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  44(2)

Citation Context:
Until 31/12/2015: (2) If a gas installation or part installation does not comply with either sections 3 to 6 of AS/NZS 5601.1 or sections 3 to 9 of AS/NZS 5601.2, any person who installs, tests, commissions, or connects the installation or part installation must do so in accordance with a certified design.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  44(5)

Citation Context:
Until 31/12/2015: For the purposes of subclauses (1) to (3),— (a) despite anything to the contrary in AS/NZS 5601.1, a gas installation that has a design capacity to consume 60 000 megajoules or more of gas per hour need not meet the requirements of paragraph 8 of clause 2.6.2, or paragraph 7 of clause 2.6.6, of AS/NZS 5601.1; and (b) despite anything to the contrary in AS/NZS 5601.2, a gas installation does not fail to be a gas installation to which AS/NZS 5601.2 applies by reason only that it receives gas at a supply pressure of more than 3 kilopascals.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  48(1)

Citation Context:
Until 31/12/2015: (1) Every certificate of compliance must record the following: (a) whether the work has been done in accordance with sections 3 to 6 of AS/NZS 5601.1 or in accordance with sections 3 to 9 of AS/NZS 5601.2... ...(c) if the work was required to comply with standards in addition to AS/NZS 5601.1 or AS/NZS 5601.2 (as applicable), which standards were complied with...

Building Code Compliance Document G4

Ministry:  Ministry of Business, Innovation, and Employment: Building Systems Performance
Section:  AS1

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  51(1)

Citation Context:
Until 31/12/2015: (1) Before a person connects a gas installation or part installation on which gasfitting work has been done to a gas supply, the person doing the connection or, if subclause (5) applies, the supervisor must... ...(g) if the gas installation or part installation is an imported gas installation or part installation, ensure that it complies with the requirements of section 2 of AS/NZS 5601.1 or section 2 of AS/NZS 5601.2 (as applicable).

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  5A(2)

Citation Context:
Until 31/12/2015: (2) In these regulations, high-risk gasfitting means any of the following, unless it is low-risk gasfitting... ...(b) any gasfitting, other than that described in paragraph (a), that—(i) is not carried out in accordance with sections 3 to 6 of AS/NZS 5601.1 or sections 3 to 9 of AS/NZS 5601.2 (as appropriate)... ...(vi) is carried out in accordance with AS/NZS 5601.2 where the operating pressure is greater than 3 kilopascals: (vii) is carried out in accordance with AS/NZS 5601.1 where the operating pressure is greater than 200 kilopascals...

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  96A(2)

Citation Context:
(2) Until 31 December 2015, a gas installation does not fail to be a gas installation by reason only that it does not meet the requirement for double pole switching in clause 6.2.8(c) of AS/NZS 5261.1 (sic) 2010 or clause 2.14(c) of AS/NZS 5601.2.

Gas (Safety And Measurement) Regulations 2010

Ministry:  Ministry of Business, Innovation, and Employment: Energy Safety
Section:  96A(1)

Citation Context:
(1) The New Zealand Standard known as AS/NZS 5601:2010 continues in force and has effect until 31 December 2015 despite the repeal of that standard by the Gas (Safety and Measurement) Amendment Regulations 2014.

International Classification for Standards (ICS) is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used.

Follow these links to find other Standards similar to the one you are viewing.

Other people who purchased this product also bought...